Russian Journal of Transport Engineering
Russian journal of transport engineering
           

2019, Vol. 6, No. 3. - go to content...

Permanent address of this page - https://t-s.today/en/22sats319.html

Метаданные этой статьи так же доступны на русском языке

DOI: 10.15862/22SATS319 (https://doi.org/10.15862/22SATS319)

Full article in PDF format (file size: 677.8 KB)


For citation:

Chernykh V.K. Modeling of corrosion-mechanical behavior of multi-element metal structures of transport works in real-world conditions. Russian Journal of Transport Engineering. 2019; 6(3). Available at: https://t-s.today/PDF/22SATS319.pdf (in Russian). DOI: 10.15862/22SATS319


Modeling of corrosion-mechanical behavior of multi-element metal structures of transport works in real-world conditions

Chernykh Valentin Konstantinovich
Samara state transport university
Saratov branch, Saratov, Russia
Penza state university of architecture and construction, Penza, Russia
E-mail: mtt91@yandex.ru

Abstract. The article is part of the author’s dissertation research. Multi-element metal structures are widely used in the construction of transport structures (metal spans, trusses of railway bridges, overpasses, etc.). During operation, such structures are subjected to the joint effect of loads, temperatures, and corrosive media. In accordance with this, the task of predicting the behavior of such structures seems to be relevant. It consists in the development of effective models oriented to the calculation of the bearing capacity of structural elements subjected to corrosive wear.

The article discusses the most common corrosion damage to metal multi-element structures of transport facilities, the classification of corrosion processes according to the nature of the surface destruction, the main types of metal elements and bridge structures. The main parameters characterizing the corrosive wear of metal structures were determined. Ways to account for the effect of aggressive environment on metal structures, i.e. well-known mathematical models and work, in which attention is paid to the problem of corrosion, wear modeling. The process of identifying corrosion wear models (determining unknown model coefficients) is described. The system of equations for determining the coefficients of a mathematical model of corrosive wear is given.

The values of the coefficients of the models used to predict the behavior of structures, with a different choice of an intermediate point are given. A statically indefinable flat five-element truss of arbitrary cross section, part of the rods of which works in tension and part in compression is considered. For this design solves the problem of assessing durability. To solve this problem, use the corrected Euler method. The obtained numerical values of the durability of trusses of five rods, depending on the lengths of the rods.

Keywords: corrosion; aggressive media; metal constructions; multi-element design; corrosive wear; superstructure; stress-strain state; finite element method; farm; stem design

Download article in PDF format

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.

ISSN 2413-9807 (Online)

Dear readers! Comments on articles are accepted in Russian and English.
Comments are moderated and appear on the site after verification by the editor.
Comments not related to the subject of the article are not published.

Добавить комментарий