2023, Vol. 10, No. 4. - go to content...
Permanent address of this page - https://t-s.today/en/21sats423.html
Метаданные этой статьи так же доступны на русском языке
DOI: 10.15862/21SATS423 (https://doi.org/10.15862/21SATS423)
Full article in PDF format (file size: 653.3 KB)
For citation:
Meshalkin V.P., Erofeev V.T., Bogatova S.N., Bogatov A.D., Morozov E.A., Smirnov V.F., Sanyagina Ya.A. Biological resistance of cellular and porous glass composites. Russian Journal of Transport Engineering. 2023; 10(4). Available at: https://t-s.today/PDF/21SATS423.pdf (in Russian). DOI: 10.15862/21SATS423
Biological resistance of cellular and porous glass composites
1Valery P. Meshalkin, 2Vladimir T. Erofeev, 3Svetlana N. Bogatova,
3Andrey D. Bogatov, 3Evgeny A. Morozov, 4Vasily F. Smirnov, 5Yana A. Sanyagina
1D.I. Mendeleev Russian University of Chemical Technology, Moscow, Russia
2Moscow State University of Civil Engineering (National Research University), Moscow, Russia
3National Research Mordovia State University, Saransk, Russia
4National Research Lobachevsky State University of Nizhny Novgorod, Nizhny Novgorod, Russia
5Research Institute of Construction Physics of the Russian Academy of Architecture and Building Sciences, Moscow, Russia
Corresponding author: Valery P. Meshalkin, e-mail: vpmeshalkin@gmail.ru
Abstract. Various types of concrete are widely used for the manufacture of bridge structures. Alkali-activated binders are now often offered in place of cement and other binders. They are formed as a result of the reaction of an aluminosilicate material with an alkaline agent such as sodium hydroxide.
Currently, more attention is being paid to research on the stability of materials under the influence of biologically active media. The article describes in detail the method of testing materials for fungal resistance and fungicidal properties.
This paper presents the results of studies of the biological resistance of the compositions of binders and cellular composites based on glass in comparison with traditional materials of inorganic and organic nature. In addition to the control additive-free compositions of cellular stellated composite, compositions modified with biocidal additives such as «Teflex» and «Biocic-T» were considered, and studies were conducted to study the effect of the aging process of a glass-alkali binder and traditional materials on their biological resistance.
It was found that the introduction of biocidal additives did not affect the biological stability of the material and only in some cases led to an increase in the radius of the inhibition zone. The results obtained during the experiment indicate that the maximum decrease in the biological resistance of materials occurs after exposure to an aqueous solution of sulfuric acid.
A comparison of the results of an experiment to study the biostability of binders based on glass waste with similar indicators of composites based on Portland cement, epoxy resins shows the consistency of using the developed binder in the manufacture of products operated under the influence of biologically active media.
Keywords: bio-resistance; mycelial fungi; glass-alkali binder; cellular and porous glass composites; cullet; aging; cement; gypsum; epoxy composites

This work is licensed under a Creative Commons Attribution 4.0 License.
ISSN 2413-9807 (Online)













